mp1005 thru MP1010 10 amp single phase bridge rectifier 50 to 1000 volts features ? low forward voltage drop ? plastic case ? any mounting position ? surge rating of 150 amps ? operating temperature: -55 c to +125 c ? storage temperature: -55 c to +150 c mcc catalog number device marking maximum recurrent peak reverse voltage maximum rms voltage maximum dc blocking voltage mp1005 mp1005 50v 35v 50v mp101 mp101 100v 70v 100v mp102 mp102 200v 140v 200v mp104 mp104 400v 280v 400v mp106 mp106 600v 420v 600v mp108 mp108 800v 560v 800v MP1010 MP1010 1000v 700v 1000v electrical characteristics @ 25 c unless otherwise specified average forward current i f(av) 10.0a t j = 75 c peak forward surge current i fsm 150a 8.3ms, half sine maximum forward voltage drop per element v f 1.1v i fm = 5a per element; t j = 25 c (note 2) maximum dc reverse current at rated dc blocking voltage i r 10 a 2ma t j = 25 c t j = 100 c pb-6 b c e d a ac + - a ac g dimensions inches mm dim min max min max note a .578 . 619 14.69 15.71 2pl b . 230 . 270 5 .84 6 .86 c . 752 --- 1 9.10 --- d .405 .445 10.29 11.31 2pl e .038 . 042 0 .97 1 .07 4pl/typ g .145 --- 3.70 --- ?
omponents 20736 marilla street chatsworth
mcc revision: 5 2008/01/30 tm micro commercial components maximum ratings ? ul recognized file # e165989 ? case material:molded plastic. ul flammability classificatio rating 94-0 and msl rating 1 ? lead free finish/rohs compliant (note 1)("p" suffix designates rohs compliant. see ordering information) notes: 1. high temperature solder exemption applied, see eu directive annex notes 7 2. pulse test: pulse width 300usec, duty cycle 1% www. mccsemi .com 1 of 3
mp1005 thru MP1010 instantaneous reverse leakage current - microamperes versus percent of rated peak reverse voltage - volts average forward rectified current - amperes versus ambient temperature - c figure 3 forward derating curve 25 50 100 150 175 0 0 2 4 6 single phase, half wave 60hz resistive or inductive load amps c 75 8 10 12 instantaneous forward current - amperes versus instantaneous forward voltage - volts figure 1 typical forward characteristics volts 4 6 20 10 amps .2 1.2 .4 .6 .8 1.0 .01 .02 .04 .06 .1 .2 .4 .6 1 2 25 c 40 60 100 1.4 figure 2 typical reverse characteristics volts .4 .6 2 1 amps 20 120 40 60 80 100 .001 .002 .00 4 .006 .01 .02 .04 .06 .1 .2 4 6 10 140 t j =25 c 1 100 4 0 25 50 75 8 figure 4 peak forward surge current peak forward surge current - amperes versus number of cycles at 60hz - cycles amps cycles 2 6 10 20 60 80 40 100 125 150 revision: 5 2008/01/30 micro commercial components mcc tm www. mccsemi .com 2 of 3
mcc revision: 5 2008/01/30 tm micro commercial components www. mccsemi .com 3 of 3 products are represented on our website, harmless against all damages. ***applications disclaimer*** ***important notice*** aerospace or military applications. products offer by micro commercial components corp . are not intended for use in medical, micro commercial components corp . reserve s the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . micro commercial components corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . the user of products in such applications shall assume all risks of such use and will agree to hold micro commercial components corp . and all the companies whose ordering information device packing (part number)-bp bulk; 200 pcs/box
|
